ClickFit EVO can be used on all standard types of roof tiles with tile lath thickness and tile thickness between 32 and 63 mm. This applies to the standard mounting option with the ClickFit EVO Universal Roof Hook. A roof tile and tile lath thickness of between 37 and 62 mm is needed if you choose to fix the panels using the ClickFit EVO Truss Hook.
ClickFit EVO can be used on tiled roofs with a slope between 10 and 60 degrees.
The ClickFit EVO Universal Roof Hook is 181,8 mm long and 36 mm wide. The click-connector on the Universal Roof Hook is height-adjustable between 68 and 98 mm.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
All solar panels in the same row are automatically interconnected thanks to the ClickFit EVO Module Clamp. To bond the entire PV system, you do need to connect each row to grounding separately, because the individual rows are not connected to each other by the mounting system. The earthing conductor (≥Ø 4mm2) runs parallel to the positive and negative conductors and is connected to a separate grounding point of the inverter. If you have any questions about grounding and bonding, please contact our technical experts.
The ClickFit EVO steel roof mounting profiles can be used on most sheet steel roofs, such as trapezoidal and corrugated steel roofs. The thickness of the steel sheets must be at least 0.5 mm. You can attach the system to all other types of steel roofs, for example the steel roof tile sheet, with the ClickFit EVO Hanger Bolt.
With ClickFit EVO Steel Roof you can choose from two types of mounting profiles: basic mounting profiles and the high optimizer ready mounting profiles. Both types are available in a variant for landscape and portrait mounting:
Mounting profile ‘Basic’ landscape (1008048): 120mm x 40mm x 23mm
Mounting profile ‘Basic’ portrait (1008049): 388mm x 56.5mm x 23mm
Mounting profile ‘Optimizer ready’ landscape (1008050): 260mm x 40mm x 50mm
Mounting profile ‘Optimizer ready’ portrait (1008051): 388mm x 57.5mm x 50mm
With ClickFit EVO Steel Roof you can choose between mounting in either landscape and portrait orientation. Choose the right variant of the mounting profile. More information can be found in our brochure.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
All solar panels in the same row are automatically interconnected thanks to the ClickFit EVO Module Clamp. To bond the entire PV system, you do need to connect each row to grounding separately, because the individual rows are not connected to each other by the mounting system. The earthing conductor (≥Ø 4mm2) runs parallel to the positive and negative conductors and is connected to a separate grounding point of the inverter. If you have any questions about grounding and bonding, please contact our technical experts.
ClickFit EVO Corrugated Roof can be used on all types of corrugated roofs. You can use the mounting bracket for corrugated sheets of type 177/51 . Use the ClickFit EVO Hanger Bolt on all other types of corrugated sheets.
The corrugated sheet bracket is 195mm long and 75mm wide. The bracket is also adjustable in height from 121.5mm to 151.5mm.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
All solar panels in the same row are automatically interconnected thanks to the ClickFit EVO Module Clamp. To bond the entire PV system, you do need to connect each row to grounding separately, because the individual rows are not connected to each other by the mounting system. The earthing conductor (≥Ø 4mm2) runs parallel to the positive and negative conductors and is connected to a separate grounding point of the inverter. If you have any questions about earthing and bonding, please contact our technical experts.
With ClickFit EVO Corrugated Roof you can choose between mounting in either landscape and portrait orientation. Choose the right variant of the mounting profile. More information can be found in our brochure.
The ClickFit EVO system is suitable for most common standing seam roofs, with the exception of copper seam roofs. ClickFit EVO offers seam clamps for single- or double-folded seams, snap and round seams.
ClickFit EVO offers a choice of 3 different seam clamps:
Clamp for double-folded seam with a seam opening of 9mm
Clamp for single-folded seam/snap seam with a 14mm seam opening
Clamp for rounded seam with a seam opening of 23mm
Yes, with the ClickFit EVO Standing Seam, you have the choice between landscape or portrait mounting of the solar panels. The click connection of ClickFit EVO is rotatable, so you only need one type of clamp.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
All solar panels in the same row are automatically interconnected thanks to the ClickFit EVO Module Clamp. To bond the entire PV system, you do need to connect each row to grounding separately, because the individual rows are not connected to each other by the mounting system. The earthing conductor (≥Ø 4mm2) runs parallel to the positive and negative conductors and is connected to a separate grounding point of the inverter. If you have any questions about earthing and bonding, please contact our technical experts.
ClickFit EVO can be used on insulated and non-insulated bitumen and EPDM roofs. Note: the thermal effect of some types of EPDM and bitumen roofing can affect the waterproofing of the PV installation. We therefore recommend that you consult the roofing supplier before installation.
The ClickFit EVO Hanger Bolt is available in 5 different types (3 lengths and 2 thicknesses):
M10 x 200mm
M10 x 250mm
M12 x 250mm
M12 x 300mm
M12 x 350mm
Yes, with Clickfit Evo Hanger Bolt you have the choice between landscape or portrait mounting of the solar panels. The Click Connection is rotatable, so you only need one type of clamp.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
All solar panels in the same row are automatically interconnected thanks to the ClickFit EVO Module Clamp. To bond the entire PV system, you do need to connect each row to grounding separately, because the individual rows are not connected to each other by the mounting system. The earthing conductor (≥Ø 4mm2) runs parallel to the positive and negative conductors and is connected to a separate grounding point of the inverter. If you have any questions about earthing and bonding, please contact our technical experts.
ClickFit EVO Arabic tiles can be used on all Arabic roof tiles. For installing panels with this system, the roof construction must consist of purlins and trusses or of a solid (concrete) sub
The ClickFit EVO Hanger Bolt is available in 5 different types (3 lengths and 2 thicknesses):
M10 x 200mm
M10 x 250mm
M12 x 250mm
M12 x 300mm
M12 x 350mm
Yes, with ClickFit EVO Hanger Bolt you have the choice between landscape or portrait mounting of the solar panels. The click connection of hanger bolt is rotatable, so you only need one type of clamp.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
With ClickFit EVO Arabic Tiles you can choose between mounting in either landscape and portrait orientation. Choose the right variant of the mounting profile. More information can be found in our brochure.
The ClickFit EVO slate roof can be used on slate roofs in whith slate tiles which are up to 6mm thick. Thicker tiles are hard to cut and require a different hook shape.
The ClickFit EVO Slate Hook (1008042) has the following dimensions:
– Footprint (LxW): 255mm x 40mm
– It is 30mm height adjustable. The lowest rail mounting position is 81mm and the highest 111mm (bottom of the rail).
– The batten distance range vary from 125mm up to 210mm. Larger batten distances are possible, but require mounting a wooden shim.
The slotted hole has two purposes:
1. It gives some flexibility as to bridge the batten distance and make sure that the mounting screw is a centered in the batten as possible to prevent the batten wood from splitting.
2. It allows you to mount the different mounting screws in a different wooden grain to prevent the wood of rafters or solid boards to split.
The height adjustment of the hook helps to align the mounting rails. Sometimes, roofs are not perfectly flat and that induces tensions and missalignments in the mounting rails and solar panels. With the height adjustment feature of the hook, you can make sure that the mounting rail is clicked on the roof hook without tension and properly aligned.
It is possible to mount the hook on rafters. However, since this hook is meant to be mounted at the same height than the slate tiles, wooden shims would have to be installed in between the rafter and the hook.
With ClickFit EVO Slate Roof you can choose between mounting in either landscape and portrait orientation thanks to the rotatable mounting rail clicker.
To attach an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our ClickFit EVO MLPE Clip Lightweight or Heavyweight (art. no. 1008067 or 1008068). Note! If you mount the panels with the mounting profiles for steel roof, we recommend choosing the high (optimiser ready) mounting profile. This provides sufficient space between the roof and the solar panels. The MLPE Clip Lightweight is simply clicked onto the mounting profile, providing integrated cable management! Then click the MLPE onto the clip. First you mount the MLPE Clip Heavyweight on the MLPE, after which you mount the clip, with MLPE, on the mounting rail. Make sure the MLPE clip is placed at least 15 cm from the end of the mounting profile. Want to see how it works? Watch our installation demo.
All solar panels in the same row are automatically interconnected thanks to the ClickFit EVO Module Clamp. To bond the entire PV system, you do need to connect each row to grounding separately, because the individual rows are not connected to each other by the mounting system. The earthing conductor (≥Ø 4mm2) runs parallel to the positive and negative conductors and is connected to a separate grounding point of the inverter. If you have any questions about grounding and bonding, please contact our technical experts.
FlatFix Fusion can be installed on flat roofs with a maximum roof slope of 3 degrees and with the following types of roof covering: concrete, bitumen, EPDM, PVC and TPO. What if the roof slope is greater than 3 degrees (or greater than 2 degrees in the case of PVC)? Then you may need to seal the roof supports of the system to the roof. Contact our technical experts for advice for your project.
You can calculate the required ballastfor your FlatFix Fusion project in the Esdec calculator. The construction plan in the Esdec calculator indicates how much ballastmust be placed and at which locations.
FlatFix Fusion is suitable for solar panels (frame thickness 30 – 50mm) with a maximum width of 1150mm and a maximum length of 2190mm.
Functional bonding of your PV installation is done automatically using FlatFix Fusion, because you use the universal module clamp with bonding. The module clamp pierces the anodized layer of the edge of the solar panels, creating an electrical connection. The centre clamps in this way create equipotential bonding between the solar panels in the direction of the row.
To mount an optimiser or microinverter (collective name: MLPE = Module Levelling Power Electronics), you can use our FLatFix Fusion MLPE Clip Lightweight (art. no. 1007042). The MLPE clip is simply clicked onto the base profile, providing integrated cable management! Then you click the MLPE onto the clip. Want to see how? Watch our installation demo.
Click here to go to the Esdec Academy. You can quickly create a free account and get direct access to the Academy.
Yes, the academy is free! Click here to create a free account.
This is very easy: click on the button for either pitched roofs or flat roofs in the center of the screen. Next pick a product or topic you want to know more about. With the enroll button, you’ll get immediately get access to the content and you can start learning where and when you want.
In the bottom left corner, you’ll have options to select different languages for your e-learning portal. For the courses themselves, you’ll have to select the appropriate language before enrolling.
The Esdec Academy offers a wide variety of courses about our different products, installing tips and how to make calculations with our Esdec calculator. Lessons keep on getting added to help professionalize installers.
All Esdec training courses and webinars are free. So quickly check our schedule to see if there is a training course or webinar for you.
Always check the spam folder of your inbox. Didn’t receive anything there either? Send an email to marketing@esdec.com, and we’ll look into it for you.
Our apologies! Check the spam folder of your inbox. Didn’t receive anything there either? Send an email to marketing@esdec.com and we’ll try to find a solution together.
Yes, you can. Send an email for marketing@esdec.com so we can help you.
Attend 3 training modules or webinars of our training programme and you can become an Esdec Solar Hero! This is only possible if you have followed at least one practical training in our Innovation Center in Deventer, the Netherlands or at the Mobile Solar Bus location. As a Solar Hero, you will receive a free gift package and a Solar Hero certificate from us. More info? Get into contact with us.
Our Mobile Solar Bus regularly visits distribution partners and installers. Check our agenda to see where the Mobile Solar Bus will be coming next. Would you like us to visit your company with the Solar Bus? Fill in this form and we will contact you.
Click here to go to the calculator. You can quickly create a free account and get direct access to the calculator. Note: the calculator is for use by professional installers only. Are you a private individual? Click here to contact a qualified Esdec installer.
Yes, the calculator is free to use! Click here to create a free account.
This is very easy: click on the NEW button in the dashboard, or click on PROJECT in the top right and then on NEW PROJECT. Then, fill in all the information on the left side of the screen, draw the roof, add the panels and download your bill of materials and building plan.
We are happy to run you through the steps. Write down the error code you see or take a screenshot so we can help you more quickly. You can reach us at +31 (0)85 070 2000.
Once you have completed all the steps, you can download the bill of materials as a PDF or CSV file. You can also download a summary of the project including construction plan. To do this, scroll down in the right column of the calculator and click on the “downloads” button.
Staat jouw vraag er niet tussen of wil je toch graag contact met ons? Vul hier je gegevens in.
